Crane Inspection– IQCert International Ltd.
IQCERT INTERNATIONAL LTD – IQCIL is an organization that has secured authorization from the Department of Inspection for Factories & Establishments (DIFE) of the Government of Bangladesh.
Before being put into service, all lifting and crane equipment must pass an in‐service load test as well as an inspection. The installation and user must demonstrate via such inspection and load testing that all specified safety requirements and codes and standards are compiled to. We are offering load testing services in line with DIFE, Bangladesh legislation as a part of the aforementioned test and inspection.
IQCERT INTERNATIONAL LTD – IQCIL provides a complete inspection and testing solution for any and all crane and lifting equipment used in industry and other establishments in Bangladesh. Our crane and lifting equipment inspections include technical safety evaluations, reports on the state of repair, and plan compliance. Design drawings, circuit diagrams, strength calculations, and structural analysis are also investigated.
IQCert International Ltd’s lifting inspection services provide efficient operational elevator safety in Bangladesh. Lift inspections are tasked to ensure to ensure public safety. IQCert International Ltd, a reputed and reliable engineering consulting company in Bangladesh, promises legal safe controls.
In Bangladesh, safety is an important issue. All companies must undertake regular crane inspections in order to prevent workplace accidents, and according to Occupational Safety and Health Administration (OSHA), Department of Inspection Factory Establishment (DIFE), and American Society of Mechanical Engineers (ASME).
IQCert International Ltd is an authorized company by DIFE.
DIFE Approval Certificates of IQCert International Ltd (IQCIL)
DIFE Approval Certificates IQCert International Ltd – IQCIL
DIFE Approval Notary IQCert International Ltd – IQCIL for Inspection of Crane, Lift, Lifting & Rigging Gear and Load Test
Heavy loads are lifted by construction and industrial cranes. Without routine maintenance, they decay and collapse over moment, endangering everyone. OSHA defines regular inspections and periodic inspections as two different types of inspections. The type of inspection that is performed on cranes varies.
With our Expertise in Inspection
Engr. Kowsik Das (C.T.O – IQCert International Ltd.)
He has been working for 17 years and he is the most senior person in the inspection, welding, testing and training industries.
He graduated in Mechanical Engineering from CUET and has multiple licenses and certifications such as (LEEA II and API – he has LEEA LEG Advanced Diploma, he has API 510 and 653 Certified Inspectors, ISO 9001 and 18001 Lead Auditor, LEEA Certified Inspectors).
He started his career as a Lifting Equipment and Welding Inspector at SOUDI ARAMCO under FMQ SONS CO in 2007, Senior PM at Elite Paint, Senior Operator Manager & Head of Industries at Bureau Veritas, DGM at TUV SUD, GM at Western Marine Services Ltd.
Competency Certificates and Licesnce of Engr. Kowshik Das – IQCert International Ltd.
LEEA certificates of Kawsik Das IQCert International Ltd (IQCIL)
API Pressure Vassel and Boiler Inspection certificates of Kawsik Das IQCert International Ltd (IQCIL)
Requirements for Crane Inspection– IQCert International Ltd.
The specifications for a successful crane inspection are laid out in OSHA Standard 1910.179, ASME B30 Safety and DIFE Standard. The following criteria apply:
- To increase workplace safety, cranes should conform to a regular inspection schedule.
- You must check the sling thoroughly before using it ,
- Two different kinds of inspections, including periodic inspection, are essential while the crane is in use.
- Cranes should only be inspected by certified OSHA inspectors.
Thorough inspection of Crane – IQCert International Ltd.
At least once a year, the crane needs to be inspected. Due to this, OSHA 1910.179 divides overhead crane inspections into two categories based on the amount of time needed to complete each inspection. These distances vary depending on the type of crane parts used and the degree of wear, degradation, or failure. The crane is inspected twice during routine and periodic inspections.
Regularly occurring visits– IQCert International Ltd.
IQCert International Ltd recurring half yearly or yearly inspections. The following is a list of these visits:
- An incorrect adjustment may prevent the crane from operating normally.
- Pumps, hydraulic systems, lines, and valves some of which have corroded or leaked
- Pump, hydraulic system, line, valve, or tank corrosion or leakage
- broken or misshaped hook
- Series with no hosts
- Unsatisfactory wire rope reversing system
- unsustainable resource deterioration
- tires that degrade over time
- Older chain drive sprockets
- Unsafe or inefficient power plants
- wear on the brake and clutch system
- faulty rivets or bearings
- Limit electrical equipment such control conductors, pushbutton terminals, and limit switches.
- overload in series
- inadequate indicators
- Bearing Deformation
IQCert International Limited’s Crane Inspection (IQCIL) is committed to ensure worker safety.
Crane inspection and maintenance plans must be followed regularly. Manufacturers of winches, mainframes, and other component processing machinery include IQCert International Limited (IQCIL), Equipment Division, and other specialists, artisans, and partners.
Our Service is Also Include.
- Crane, Lift, Elevator, Escalator Inspection & Load Test.
- Equipment and Construction Machine Inspection.
- Heavy and Light Transportation Equipment Inspection
- Boiler and Pressure vessel Inspection
- NDT Testing and Service
- Rigging Gear – Lifting Appliances Inspection & Load test
- HSE Competency Training Service ( Operation, Rigging, Working at Height, Confined Space, Power Tools, Scaffolding and Life Line Training)
DIFE and other crane inspections are among the IQCert International Ltd (IQCIL) Services and components may offer. Our qualified inspector can make sure that the crane conforms fully with DIFE, OSHA & ASME requirements and all current norms and laws.
To find out more or to satisfy your crane inspection needs, Call us right away or submit a Price request.
Mobile :+8801400-485888, +8801722283001
Email: operation@iqcertinter.com
Web: www.iqcertinter.com