DIFE (DEPARTMENT OF INSPECTION FOR FACTORIES AND ESTABLISHMENTS UNDER MINISTRY OF LABOR AND EMPLOYMENT)

DIFE (Department of Inspection for Factories and Establishments under Ministry of Labor and Employment)

DIFE (Department of Inspection for Factories and Establishments under Ministry of Labor and Employment) has approved/ enlisted IQCert International Limited to conduct Lift (Passenger lift, Cargo lift) ,Lifting gear, Crane (Tower crane, Gantry Crane, Overhead crane, truck mounted crane, crawler carne), Boom lift, scissor lift & Fork lift inspection also Pressure Vessel inspection such as compressor air tank/ air receiver, hydro-pneumatic tank, , Boiler Feed Heater (Closed); CNG/LPG/NG Storage, Hot water tank and boiler & compressor inspection (Boiler safety valve test etc.)

As per Bangladesh Labor Law 2006 (sec: 68, 69, 71 &88) & Bangladesh Labor Rules 2015 (rule: 60.1.a, 60.1.e, 60.1.0, 62,65 (2) and schedule-3 Factories and establishments requires arrange to conduct lift, Crane, Hoist... inspection by DIFE approved and enlisted 3rd party company.

LIFT , CRANE, VESEL, BOILER, HYDRO-PNEUMATIC TANK INSPECTION

IQCert Equipment Specialist Team

LIST OF EQUIPMENT, LIFTING GEAR AND TOOLS

IQCert Company is a Bangladesh based company servicing inspection across Bangladesh. IQCert is a professional engineering service company specializing in Inspection, Testing, Verification, Training, Certification, auditing and engineering consulting services to various industries & oil and Gas. Our purposes to provide accurate, fair and reliable service and continuously improve the quality level of industrial area and we are always committed to fulfil clients’ requirements and expectations.

IQCert recognized for quality and safety provides its services in areas but not limited to, Crane & Lifting Equipment Inspection, all kinds of Earth moving machines, Elevator & Escalator Inspection, and Mechanical Equipment Inspection, Project inspection & Vendor Inspection, Crane Operator & Rigger Training, Rigging Consultancy & Crane Accident Investigation, Calibration for welding Machines, Air Compressor & Generator, Oil & Gas Services and NDT Inspection.

Our Flagship services showcase

Integrity

Innovation

Ingenuity

Effective communication to ensure that we provide quality reporting above your company standards to meet project needs.

Goals

To provide our clients with educated and experienced inspectors while maintaining an accident-free environment, keeping cost minimal and increasing customer satisfaction.

Safety

To maintain an accident-free environment and safety atmosphere where each employee has a key role in maintaining an environmentally sound work place. We are committed to delivering excellence in everything we do. Our staff knows, customer satisfaction is the key to our success.

Success Tools:
• Promoting a safety atmosphere
• Monitoring & Controlling change
• Managing time to meet client time constraints

Services Overview

Our comprehensive range of world-leading inspection, QA, verification & regulatory services. Our inspectors are qualified to provide services across industrial products. We aim to help you to meet all relevant regulatory requirements across different regions and markets. We are also committed to ensure all our services are conducted according to our HSE procedures providing safety solutions. Farida Equipment Specialist Team Company provides high quality Testing & inspection services to oil & gas industry in compliance to industrial best practices. All our inspectors are well trained and certified by international recognized schemes such as IRATA (Rope Access), LEEA, API, ASME, ANSI, BSI & RECOGNIZE G.I etc. to ensure high quality services provided.

Our Testing & Inspection services include:

• Elevating/Lifting Equipment Inspection 3rd Party Inspection for all Types of Lifting Equipment
• Providing RECOGNIZE Sticker
• Inspection Survey for Onshore & Offshore Rigs
• Annual/Six- and Three-Monthly Inspections Can Be Scheduled to Keep Your Equipment Certified & In Date
• Heavy & Earthmoving Equipment
• Onshore & Offshore DROPS Survey
• All Types of Cranes Inspection
• Mast, Derrick & Substructure Inspection as per API RP4G
• Non-Destructive Testing (NDT)
• Load Testing
• Training & Certification Services
• Rental Equipment (Water Bags, Load Cells, Pad eye tester & Dead Weight) Calibration

Lifting Equipment Inspection

Lifting Gear Inspection is a systematic and detailed examination of the equipment and safety-critical parts conducted by our competent Inspectors at regular intervals. As a full audited member of Lifting Equipment Engineers Association and in accordance with LEEA best practice & LOLER requirement, IQCERT COMPANY can inspect and certify various lifting appliances such as pad eyes, runway beams, etc & and various lifting accessories such as wire rope slings and shackles, etc. After the inspection, our clients are able to access the full written reports using our online tracking system after the completion of the inspection. IQCERT provides comprehensive inspection of all hoisting and lifting gear on land rigs, FPSOs and drilling units. Equipment is inspected to the latest vendor, API, BS and European guidelines, as well as LOLER 98 (UK Statutory Instrument No. 2307) and LEEA. All equipment, from the largest cranes to the smallest shackles and slings, is registered in our portable database reporting system to ensure a systematic and thorough traceability process.

Load Testing Services

Load Testing helps to identify the maximum operating capacity of an application/device/equipment. IQCERT COMPANY is capable to conduct load TEST on Lifting Equipment & Appliance, BOP Hoist, Offshore/ Onshore Crane and BOP Lifting Frame, etc, in compliance with API , ASME ,RECOGNIZE G.I.7.030 , Bangladesh Recognize DWO-DOE&CD-SWIM-001 specifications, LEEA requirements and relative international standards.

Heavy and Earthmoving Equipment inspection

Now, more than ever, heavy equipment product safety and regulatory compliance is a critical issue for manufacturers. Both domestic and international distribution channels and end users demand adherence to existing and emerging standards. IQCERT COMPANY offers domestic and international Testing, certification services, and solutions for heavy and earthmoving equipment. As a European Union notified body, we are authorized to inspect machinery in accordance with Machinery Directive 2006/42/EEC, a revision to EC Council Directive

Non-Destructive Testing (NDT)

Non-destructive Testing or NDT is the process of evaluating materials, components or assemblies for any discontinuities, or defects without destroying the serviceability of the part or system. IQCERT COMPANY is able to provide different methods of Testing to determine the integrity of the structures and other equipment including

- Ultrasonic Testing
- Magnetic Particle Inspection
- Liquid Penetrant Testing - Eddy Current Inspection
- Visual Inspection
- Ultrasonic Thickness Measurement of Marine and Offshore Structures (Ships & Rigs) which includes,
- Hull UTM Survey for All Types of Ships & Rigs

API RP 4G Derrick, Mast & Substructure Inspections

Masts and derricks support enormous loads when drilling and running casing. API recommended practice for mast and derrick inspections is a critical element to avoiding potentially non-productive time or even serious incidents and catastrophic events during drilling operations or following rig reactivation.

IQCERT INTERNATIONAL Ltd. offers full API 4g derrick inspections in line with API-recommended practice. API-recommended practice 4g has established four categories for drilling and well servicing structure inspections and sets forth personnel qualifications for these inspections.

CATEGORY i

Category I inspections are carried out by general rig personnel conducting daily observation of the mast/derrick and substructure during operation to determine indications of inadequate performance.

CATEGORY ii

Category II inspections are performed by personnel having adequate experience and knowledge in masts/derricks.

CATEGORY iii

Our Category III inspectors are in possession of a recognized degree, certificate, or professional standing, or who by knowledge, training, or experience have successfully demonstrated the ability to resolve problems related to the subject matter or work in question.

CATEGORY iv

Category IV inspections are closely supervised by a professional engineer, original equipment manufacturer representative or other manufacturer of drilling structures' authorized representative. IQCERT International Ltd. Category IV inspectors satisfy the requirements of Category III inspectors and are also qualified to perform weld inspections.

Oil Country Tubular Goods (OCTG) Inspection

API and Premium OCTG oilfield thread and tubular inspections, third-party monitoring, and safety training.
IQCERT provides the highest quality Service Representatives available in the oilfield for Premium & API Threaded Oil Country Tubular goods. IQCERT personnel are oilfield veterans experienced in a wide range of tubular material, and connection types. Our technicians are extensively cross trained in all aspects of the tubular running process. Providing a full Inspection and refurbishment service of new and used casing and tubing, adhering to A.P.I. or Company Specifications.

IQCERT experience coupled with continual improvement in both service and documentation provides our customers with the most comprehensive service program available.

IQCERT Field Service Representatives' experience includes:

• Background of product applications for API and Premium Connections
• Knowledgeable in tubular product design / CRA Tubular Consultants
• Product inspection and repair procedures for API and Premium Connections
• Product running and pulling procedures for API and Premium Connections
• Product handling procedures for API and Premium Connections
• Comprehensive Safety Training
• Nationwide land, inland waters, offshore, and international experience
• Casing and Tubing Inspection
• Premium Connections / API Connections Inspection
• Visual Thread Inspection
• Full Length API Drift
• Full Length Magnetic Particle Examination
• Special End Area Inspection

Cargo Container Inspection Services - CCI

Cargo container loading, unloading and seaworthiness inspection services IQCERT cargo container inspection services have been specifically developed for those clients that not only require reassurance during the container loading and unloading process, but also confirmation that safety and quality requirements are met and that correct goods handling procedures are put in place and adhered to. We provide you a global view on inspection, certification and making sure your containers meet the right regulations and standards, wherever they're produced and used.

All of IQCERT COMPANY inspectors are fully trained not only to supervise but to closely monitor the loading and unloading process and are qualified to inspect the containers for sea worthiness as part of our In-Service Checks.

We offer a full range of services to the container industry from new construction certification for all ISO and offshore container types to approval of modifications and in-service inspection.

Scaffolding Inspection

IQCERT offers an independent scaffold inspection service that meets requirements and international standards. Our experienced and well-trained scaffolding inspectors will carry out a thorough scaffolding inspection providing full report and tagging system (if requested).

Although scaffolding inspection must be carried out by law, site owners can run their operations with confidence and peace of mind that on-site workers can work properly in a safe environment following an inspection by our qualified scaffolding inspectors.

Training & Certification Services

Dedicated to helping you maintain a safe working environment by achieving operator competence and heightened levels of safety awareness amongst your employees. We offer several training courses to meet your needs. These courses focus on safety and technical competency and Our highly qualified instructors have a wide range of experience in offshore and onshore training, short courses for equipment use and inspection, technical NDT courses, and Dropped Object Survey training courses.

Our aim is to always serve our customers and partners with the highest level of quality when it comes to consulting, services, and most importantly training and certification. We strive to offer training services and training courses that improve people’s performance and ultimately company efficiency. TEST also offers courses that can be tailored specifically to fit your requirements and goals to meet your business client’s standards. IQCert is an accredited designed in accordance with international and local standards. training provider by lifting Equipment Engineers Association – LEEA through NEFT ENERGIES Training Centre.

IQCERT INTERNATIONAL Ltd. offers full API 4g derrick inspections in line with API-recommended practice. API-recommended practice 4g has established four categories for drilling and well servicing structure inspections and sets forth personnel qualifications for these inspections.

Courses we Offer:
• Rigging Loft Management Awareness
• Lifting Equipment Inspection Training Course
• Lifting Operation Supervisor Training Course
• Manual Handling Awareness Training Course
• Forklift Operator Assessment Training Course.
• Fork Lift Truck – Refresher/Re-certification Training Course.
• Mobile Crane Operator Assessment Training Course.
• Mobile Crane – Refresher/Re-certification Training Course.
• Mobile Crane Supervisor Level II Training Course Overhead Gantry Crane Assessment
Training Course.
• Rigging & Slinging Training Course.
• Slinger / Banks Man/ Signaler Training Course.
• Working at Height Training Course.
• Planning of Lifting Operation Training Course.
• Dropped Objects Awareness and Prevention Training Course.

HSE Courses:
• Basic & Advanced First Aid
• Basic & Advanced Fire Fighting
• H2S / Breathing Apparatus
• Defensive Driving (Heavy Goods Vehicles & Light Vehicles)
• Scaffolding Awareness Program
• Accident And Incident Investigation
• Chemical Handling
• Electricity At work
• Emergency Response
• Environmental Awareness
• Food Hygiene
• Gas Testing
• General Safety
• Home and Office Safety
• Lockout And Tag out procedure
• Manual Handling
• Noise At Work
• Permit to Work
• Risk Assessment
• Risk Management
• Safe Working Procedures
• Welding Safety
• Workshop and Warehouse Safety
• Working at Heights
• Abrasive Wheels
• Man lift Operations
• Confined Space Entry

DIFE